It is simple to replace the faucet on a bathroom sink. You will just need a few simple tools and a little amount of time to complete this project. Even a complete novice can do this do-it-yourself job. In fact, if you are on a tight budget, it is nearly a must to do it yourself since plumbers may be quite costly.
The very first step is to switch off the water supply to the house. It is remarkable how many people who do their own home remodeling overlook this easy step. If you attempt to disassemble a faucet without taking this precaution, you will almost certainly flood your bathroom before you can complete this step.
If there is any pressure left after turning off the water, let the water run until there is no more pressure. If you don’t, you’ll have to dry everything out. Start working on the bathroom sink faucet now that you’ve finished your first project.
This DIY project will obviously include the use of a faucet, but you won’t require much else. Finding a beautiful faucet at an affordable price is just one of the equation when purchasing a new faucet. Not every bathroom faucet is compatible with every bathroom sink. A few of them have two holes, while others have three. Some have the holes spaced 3 inches apart, while others are spaced 3.5 inches apart. Before you start shopping for a faucet, measure the distance between the holes in your existing faucet. It is not necessary to remove the existing faucet in order to accomplish this since you can measure it from below.
A wrench is the tool of choice for you. Caulking and a putty knife will also be required for the removal of the old caulk. Additional materials include: You may also need a screwdriver from time to time, but not much more than that. Purchasing all of these items is often, if not always, less expensive than hiring a plumber.
Removing a faucet is a straightforward procedure that anybody can do. Except for removing the nuts and screws that you locate, disconnecting the supply lines, and removing the old caulk from the surface, there isn’t much to do. The procedure of mounting it is essentially the converse of the process of unmounting it.
Everything should be cleaned to the best of your ability. You may also put off caulking anything until later since caulk will not adhere to a damp surface. You should use an anti-caulking chemical to clean everything even if you don’t see any signs of caulking remaining. This may seem to be a drastic measure, but when you realize that mildew is a serious health threat and that it is very difficult to eradicate, it is a reasonable one.
After you have finished installing the faucet, run water through the bathroom sink to check for leaks in the installation.
In addition to being an executive sales leader and a security specialist, Tab Pierce has spent years building his business from the ground up as a serial entrepreneur. He has built and sold profitable businesses in a variety of industries, including eLearning, data management, telecommunications, and others. He has also been effective in assisting businesses in the implementation of sound sales practices inside their organizations.
Making a decision on a replacement bathroom sink faucet
Depending on your preferences, bathroom faucets may completely transform the appearance of a space or can be kept as simple as possible. Because of the large number of bathroom sink faucets available, you have the choice to choose a bathroom sink faucet that matches your own preferences as well as the overall design of your house. Installing a beautiful new bathroom faucet can be a very satisfying experience, and there is no need to be intimidated by the number of options that are now available. The fact that no one faucet will work with every sink means that narrowing down your selections to find the right faucet may be less difficult than you think.
First, establish how many holes your sink has and how far apart they are from one another. Depending on the sink, some have just one hole, while others have two or three. You already know that a single-hole sink necessitates the use of a single-hole faucet. You will need to know the distance between the centers of the outer two holes on your sink if it has more than one hole in order to guarantee that you choose a faucet that will fit. This distance is referred to as the faucet spread. Similar to this, a wall-mount faucet should be replaced with a similar-style wall-mount faucet to match.
An additional dimension to consider is the distance between the faucet handles and the wall that is directly behind them. The handles should be able to be manipulated comfortably since they should have ample space. If you have a restricted amount of space between the faucet and the wall, this is something to keep in mind when choosing your sink faucet. As soon as you have taken all of the essential measurements, you can narrow down your faucet choices to just those that are compatible with your sink.
Once the possibilities have been limited down to those that will work with your sink, it is time to get to the fun part: picking a style. A wide variety of bathroom faucet types are available, ranging from the most basic to meticulously detailed antique copies and everything in between. When it comes to choosing the correct faucet type for your house, personal choice is the most important consideration. However, you should also consider other elements such as the other fixtures in the room and the overall design of your home. The bathroom will have a more coherent appearance if your new faucet is coordinated with the old fixtures. If you are changing all of the fixtures at the same time, selecting from a collection will guarantee that all of the finishes and styles are complementary to one another. Choose a bathroom sink faucet that complements the design of the rest of your house if the rest of your home is decorated in a certain manner. There are no hard and fast rules when it comes to matching styles, but a modern faucet, for example, may appear best in a house that is designed in a contemporary style.
Basic Procedures for Removing and Replacing a Bathroom Sink Faucet (with Pictures)
It’s possible that you’ll need to replace the faucet on your bathroom sink from time to time. Because this is such an uncommon occurrence, it’s easy to get overwhelmed by the possibility of participating in it.
What is the best way to go about achieving this? What is the best place to begin? Please don’t be concerned; it isn’t that difficult. Indeed, it is a really straightforward procedure. Replace your bathroom sink faucet by following the methods outlined below.
First and foremost, you must collect all of the equipment and supplies that will be required to execute the work. You’ll need an adjustable wrench or a pair of wrenches to complete this project. Using them, you will be able to unscrew and reinstall your faucet fixtures with ease.
Acquire some cleaning products so that you may remove any filth, grime, or mildew that may have developed beneath your old sink faucet and replace it. After you have installed your new faucet, you will also want caulking and teflon tape to patch up any gaps that may have formed.
Last but not least, you’ll need a new faucet fixture, of course. The quickest and most straightforward method is to purchase a fixture that fits the existing counter holes. Otherwise, you’ll have to drill new holes in your counter top or purchase a new counter top that will accommodate your new fixture.
To begin, cut off the water supply before you begin. You can turn off the water supply to your bathroom sink, but turning off the main line is a safer option in this situation. After that, turn on the faucet to flush out any remaining water that may have accumulated in the pipes.
Take a look beneath the sink and remove the nuts that link the water supply pipes to the faucet fixture. Now you can replace the faucet fixture. As a next step, you will need to take out the retaining nuts that secure the faucet fixture to the counter. If you don’t already have one, try investing in a basin wrench to make accessing them a little easier.
After you’ve removed the retaining bolts, you may remove the faucet fixture by pulling it out from the top. Make a mix of bleach and powdered laundry detergent and use it to clean the area. Remove any moisture from the area to ensure that mildew or mold does not collect beneath the new faucet. It is extremely recommended that you use a hair dryer throughout this process.
After the area has been thoroughly dried, insert the replacement fixture. Retaining nuts should be screwed in. Return to the top of the sealant and clear up any extra sealant that has been forced out due to the pressure.
After that, return to the underneath of the sink and cover the faucet connections with plumber’s tape once again. Only enough to go twice around the bottom border is required; a little amount is sufficient. Make certain that you wrap it in a clockwise direction.
After that, reattach the water supply piping. Check to verify that everything is snug and secure before re-connecting the water supply. Allow the water to run for a few minutes to check for leaks. If there aren’t any, you’ve successfully changed the bathroom sink faucet in the sink area. All that is needed is to caulk around the base of your new faucet and allow it to dry for 30 minutes before continuing. Give yourself a pat on the back for your efforts.